Effect of synthesis temperature on the carbothermal reduction of silicon carbide from rice husk with copper additive
发布时间:2026-11-09 | 来源:Nature Scientific Reports | 作者:Kieu Do Trung Kien
The synthesis of silicon carbide from rice husk typically requires temperatures above 1500 °C due to limitations in solid-state diffusion. In this study, a Cu-c
The synthesis of silicon carbide from rice husk typically requires temperatures above 1500 °C due to limitations in solid-state diffusion. In this study, a Cu-catalyzed carbothermal reduction route was investigated using a rice husk–silica gel mixture at a fixed mass ratio of 1:1.4 over the temperature range of 900–1300 °C. For the as-synthesized products, three distinct kinetic regimes were identified: a gradual increase in SiC yield from 900 to 1100 °C (4.63% per 100 °C), a sharp acceleration between 1100 and 1200 °C (8.48% per 100 °C), and a plateau approaching saturation from 1200 to 1300 °C. This kinetic enhancement is fundamentally driven by the Cu catalyst, which promotes a transient liquid-phase-assisted growth mechanism via the formation of a low-temperature Si–Cu eutectic (~ 800 °C), thereby significantly accelerating atomic diffusion between the liquid and solid phases. Following HF purification, the overall SiC content increased rapidly—averaging ~ 14.85% per 100 °C across the 900–1200 °C range—before leveling off. Ultimately, an enhanced SiC content of 88.47% (ISO 21068-2:2024) was achieved at 1300 °C. This demonstrates that the synergistic combination of Cu-catalysis—which substantially lowers the required synthesis temperature compared to conventional non-catalytic processes—and selective HF purification provides a highly effective pathway for converting biomass-derived precursors into advanced ceramic materials. XRD analysis confirmed the formation of predominantly cubic 3C-SiC, while FTIR spectra revealed characteristic Si–C vibration bands at 809 and 624 cm⁻¹. HF treatment effectively removed residual SiO₂ and Cu oxides, as evidenced by SEM/EDX analysis. The combined catalytic assistance and selective post-purification enable the formation of enhanced-purity SiC at significantly reduced temperatures, demonstrating an efficient pathway for converting biomass-derived precursors into advanced ceramic materials.
返回资讯频道