CaCO3-Filled Polypropylene Block Copolymer Composites: Strain-Rate-Dependent Tensile Behavior, Bergström–Boyce Calibration, Parameter Identifiability, and Creep and Stress-Relaxation Prediction

发布时间:2026-11-12 | 来源:MDPI Polymers | 作者:Şenol Şahin, Emir Haktan Ünal, Ferhat Akpınar

Finite element analysis predicts the response of filled polymers only when the constitutive model suits the material and its parameters are reliably identified.

Finite element analysis predicts the response of filled polymers only when the constitutive model suits the material and its parameters are reliably identified. This study evaluates the applicability and limits of the Bergström–Boyce (BB) model for calcium carbonate (CaCO3)-filled polypropylene block copolymer (PPB). Neat PPB and composites with 10, 20, and 30 vol% CaCO3 are tested in uniaxial tension at five strain rates and characterized by dynamic mechanical analysis and differential scanning calorimetry. The BB parameters are identified by a multi-start evolution strategy with trust-region refinement, and their identifiability is assessed by sensitivity, Fisher-information, profile, and multi-start analyses. The filler raises Young’s modulus from 1523 to 3716 MPa while reducing ductility and rate sensitivity. The model reproduces the tensile response with R2 = 0.94–0.99 in calibration and 0.96–0.99 at the two withheld strain rates, whereas the viscous-network locking stretch is unidentifiable. Without refitting, the parameters predict the stress relaxed in 1 h within a median factor of 1.3. Predicted creep, however, inherits the stress exponent of the flow rule and approaches the measurements only near 11–17 MPa. Identifiability established in tension is thus local to the calibration conditions; sustained loading requires creep or relaxation data at the service stress.

返回资讯频道