Nanocomposite Based on Special Engineered Cr3+-Doped Layered Double Hydroxides Embedded in Electrospun Poly(vinylidene fluoride-co-tetrafluoroethylene) Fibers for Photoinduced Pb2+ Removal
发布时间:2026-11-12 | 来源:MDPI Polymers | 作者:Kameliia I. Rashitova, Semen Goreninskii, O.V. Kukartseva, Н. П. Бобрышева, Mikhail G. Osmolowsky, M
In this work, we synthesized Cr3+-doped Mg-Al layered double hydroxides by co-precipitation, varying reagent addition sequence and with or without NaCl. The sam
In this work, we synthesized Cr3+-doped Mg-Al layered double hydroxides by co-precipitation, varying reagent addition sequence and with or without NaCl. The sample prepared by simultaneous addition without NaCl exhibited the highest specific surface area (103 m2·g−1) and narrowest band gap and was selected for incorporation into electrospun poly(vinylidene fluoride-co-tetrafluoroethylene) (VDF-TeFE) fibers at 0.1, 0.5, and 1.0 wt.%. The 0.5 wt.% composite showed optimal photoinduced Pb2+ removal: 80% after 2 h UV irradiation compared to 50% after 4 h in the dark and 17% for pristine polymer. Scavenger experiments revealed different mechanisms. Pristine polymer removal proceeds via electron-driven reduction to metallic lead (Pb0), while the composite follows a superoxide-mediated pathway, with no Pb0 detected on the surface. Analysis of the bare nanopowder after Pb2+ removal revealed formation of hydrocerussite (Pb3(CO3)2(OH)2). We suggest that UV irradiation can activate defects on the embedded particles, creating local charge domains that drive Pb2+ migration to the particle–polymer interface, where superoxide radicals locally increase pH and promote precipitation as hydrocerussite. This work demonstrates a photoinduced sorption pathway for stable lead immobilization.
返回资讯频道