Adaptive PV-FSI: defect-aware and condition-corrected severity assessment for UAV-based photovoltaic thermographic inspection

发布时间:2026-11-13 | 来源:Nature Scientific Reports | 作者:Masud Kabir

Photovoltaic (PV) fault severity quantification from UAV-based infrared thermography increasingly relies on composite indices. This study evaluates the PV Fault

Photovoltaic (PV) fault severity quantification from UAV-based infrared thermography increasingly relies on composite indices. This study evaluates the PV Fault Severity Index (PV-FSI) on the DTU Drone Infrared Thermography Dataset (640 acquisitions of 43 deliberately degraded modules, seven defect types), with module-level statistics as the primary evidence. First, the Thermal Entropy Index (TEI) explains little of the PV-FSI variance ( \(R^2 = 0.032\) ); its module-level association with PV-FSI is weak ( \(\rho = -0.112\) , \(p = 0.476\) ), and a stratifier that excludes TEI does not support a severity-dependent sign reversal. Second, per-defect principal component analysis separates a TEI-dominated crack family from an HSI/TNI-dominated high-intensity family; family-adaptive weighting increases between-defect-type separability (module-level Kruskal-Wallis H from 20.59 to 33.65), the gain persists in most held-out module splits and a ratio proxy assigns the family with leave-one-out accuracy 0.953. Third, a defect-specific residual irradiance correction (PV-FSI \(_{\text{IR}}\) ), fitted on the 468 acquisitions meeting IEC TS 62446-3, removes the pooled irradiance drift ( H from 31.72 to 3.76). Referenced to nameplate power, PV-FSI shows no significant within-type association with \(P_{\text{mpp}}\) ; it is therefore positioned as a thermal severity descriptor for inspection triage, complementing electrical characterization. The results come from a single site without healthy reference modules and motivate multi-site validation.

返回资讯频道